Project Materials GmbH

Products

Product Range
PM Piping offers comprehensive and sophisticated supply solutions for all steel materials used in the energy sectors. We offer piping materials made of Carbon steel, Alloy and Stainless Material Grades, special material grades such as Hastelloy, Inconel, Monel, Duplex, Copper-Nickel and others.

Pipes, seamless and welded (ERW, HFI, EFW, LSAW & HSAW)

  • Seamless: from ½” up to 24”
  • ERW/HFI: from 4” up to 24”
  • EFW, SAW: from 16” up to 250” (as used for offshore structures)
  • Linepipes as per API 5L, 5LC (CRA lined pipe), 5LD (clad linepipe) including high yield linepipes for sour/non sour applications, onshore and offshore applications. Bends manufactured from seamless and welded pipes.
  • Process Pipes to ASTM, DIN,EN, typical materials are all CRA grades, including Duplex, Super Duplex and Lean Duplex, low and high alloyed Carbon steel grades
  • Heat exchanger tubes to EN, ASTM, made of Aluminum, Copper, Copper-Alloys, Nickel, Nickel-Alloys, Titanium, all typical CRA and Carbon steel grades

Buttweld Fittings:

  • Elbows, Reducers, Tees, Caps, Laterals and special fittings such as Crosses, Barred and Split Tees, Headers, Manifolds, Saddles, etc. in accordance with ANSI/ASME B16.9/B16.28, MSS-SP, DIN, AFNOR, CSA, GOST, NACE, etc.
  • Typical Material Grades: WPB, WPC, WPL6, WPHY42 to WPHY70, WP11, WP22, WP5, WP9, WP91, WP92, WP304, WP321, WP347, WP316, S31803, S32760, N06625, N08825, CUNI, WPT2, WPT12 etc.

Forged Fittings:

  • Elbows, Tees, Reducers, Caps, Couplings, Unions, O'lets, Nipples, Bushings, Crosses, Plugs, etc. to ANSI/ASME, BS, MSS, NACE, etc.
  • Typical Material Grades: A105, LF2, F304, F316, F11, F22, F5, F9, F52, F60, F51 etc.

Flanges:

  • WN-, SW- and Blind Flanges, Slip-On Flanges, Spectacles, to ASME, MSS for FF (flat face), RF (raised face) or RTJ (ring joint) facings, all pressure ratings

Orifices:

  • Orifice Flanges, Spacers & Blinds in accordance with customer provided drawings.

Bolts:

  • Stud bolts and Machine Bolts with Nuts and Washers.

Gaskets:

  • Rubber and PTFE Gaskets, Spiral Wound Gaskets, RTJ Gaskets, Insulating Kits.

Valves:

  • Gate-, Globe-, Ball-, Butterfly- and Check Valves.
  • Plug-, Angle-, Safety- and Control Valves.
  • Wellhead equipment
  • Valves used for applications in refineries, petrochemical plants, power generation, E&P, Mining, Marine, LNG & LPG projects
  • Valves manufactured from cast & forged steel or cast iron
  • All pressure ratings from 150 up to 4500
  • All kinds of end connections such as: flanged, BWE, RTJ, socket weld, threaded etc.
  • All trims can be supplied
  • In accordance with the following standards: API 600, 602, 603, 608, 609, 598, 6A, 6D, ANSI/ASME, MSS-SP, BS, DIN, GOST, NACE, etc.
  • Services: high pressure and temperature service, low temperature and cryogenic service
  • Bolted, bellow, welded or pressure seal bonnet and FE execution
  • Full port, regular and reduced port
  • Metal or soft seated
  • Carbon, stainless, alloy & duplex materials
  • Operation can be with gear, electric, pneumatic, hydraulic drive

Actuators:

  • Electric and Hydraulic Actuators, Gear-boxes.

Miscellaneous:

  • Strainers, Steam Traps, Sight Glasses.

 

 

To top

PM Piping

With 40 locations worldwide, we're always close to you. Learn about our global presence. >> GO